Sculpted Ladle

I had a chunk of curly maple that I had trimmed off of a bowl blank.  The way it was shaped looked perfect for a ladle.  I used the bandsaw, a bur in a die grinder, the spindle sander, and hand sanding to shape the profile.

2015 Kitchen Utensil Challenge

Patrick’s Workshop https://www.youtube.com/user/Patricksworkshop
Nick Ferry https://www.youtube.com/user/ferrynick
Ted Alexander https://www.youtube.com/user/TedCAlexander
DIY Tyler https://www.youtube.com/user/TylerGiannattasio
McGinns Woodshop https://www.youtube.com/user/McGinnsWoodShop
Rich McNatt https://www.youtube.com/channel/UCJQKDs_2LW5RJX3oFvqMzpQ
Jay Bates  https://www.youtube.com/user/Jayscustomcreations
April Wilkerson https://www.youtube.com/user/AprilWilkersonDIY
Steve Carmichael https://www.youtube.com/user/carmichaelworkshop
Dominic’s Woodworks  https://www.youtube.com/user/DominicsWoodworks
Alistair Darroch https://www.youtube.com/user/ShavingsandAwl
Dale Wienke https://www.youtube.com/user/Beavervalleywoodwork
Stephan Poehnlein https://www.youtube.com/user/pipolinoaustria
Tom  Howbridge   https://www.youtube.com/user/Tomhowbridge
Adventures In DIY  https://www.youtube.com/user/AdventuresInDIY
Mike Fulton https://www.youtube.com/user/mfwoodshop
Joe Whittaker https://www.youtube.com/user/AverageJoesJoinery
Peter Brown https://www.youtube.com/user/kludge1977
Sterling Davis https://www.youtube.com/user/SterlingsWoodcrafts
NKWB https://www.youtube.com/channel/UCdCoqw6naNcgONTP5kpuJvQ
Cy’s Corner https://www.youtube.com/channel/UCOoeZFDsNp4US0BEvevTQmw
Jason Rausch https://www.youtube.com/user/rauschww
Rock N H Woodshop https://www.youtube.com/user/rhwoodshop
The Nomadic Polywright Show https://www.youtube.com/user/johnzzhu
Andrea Arzensek https://www.youtube.com/user/ArzensekAndrea
Wildman Project https://www.youtube.com/user/WildmanProject
Fabian’s Tiny Workshop https://www.youtube.com/user/swingguitar1950
Darbin Ovar https://www.youtube.com/user/darbinorvar
Wood n Stuff w/ Steve French https://www.youtube.com/user/blockyimage
Izzy Swan https://www.youtube.com/user/rusticman1973
Grady Hillhouse https://www.youtube.com/user/gradyhillhouse
Chris Pine workshop https://www.youtube.com/user/TheChrisPineWorkshop
Matthew Cremona  https://www.youtube.com/user/mcremona
Jack Houweling https://www.youtube.com/user/Jacka440
Eric Lindberg https://www.youtube.com/user/EricLindberg27
RJB Wood Turner https://www.youtube.com/user/RJBWoodTurner
Jeffery Ferguson https://www.youtube.com/channel/UC4hVnXleh8X-IL8ESPrORaw
Dema  Gamayunov https://www.youtube.com/channel/UC7vWanaSndGlwpsNCYm0YqA
Nicholas Gomez https://www.youtube.com/user/nicholasgomezable
Mark Christopher https://www.youtube.com/user/xgxdxer
Summers Woodworking https://www.youtube.com/user/summerswoodworking

Sponsors
Recent
Log Trailer

Making Ramp Mounts for my Trailer

I wanted aluminum ramps so they’d be lightweight and I bought some vs making them myself because after building this trailer, I just wanted to

Woodworking Projects

Walnut Dressing Vanity Build

To start things off, I’ll make the panel which will become the sides and top. While that’s sitting in the clamps, I’ll prep the material

One Response

  1. Might want to use the spoke shave ,hook knife and gouges.Would cut down on the dust and speed the process,…Did you ever turn the round carvers mallet I suggested for carving.???..Would releave the stress on the hands and arms and less chance of slips when carving your fans and shells! check out Follensbee for design refinement.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.