Spice Boxes, Skateboards, Making Pencils

The cherry spice box is ready for finish now that the lid is installed with the glass!

Spice box and Spoon Class: https://thewoodwhispererguild.com/product/spice-box-spoon/

Woodsmith Workshop
Sept 30 & Oct 1, 2019
Urbandale, IA

Pencil Making Tool: https://www.in-kleind.com/store/Pencil-Making-Tool-c35225011

Viewer Projects

Patio Table Top by Jacob

This is a patio table top that I made for my neighbor. It’s made from cedar and is cut into a icosagon (20 sided). All the voids were filled with epoxy and finished with spar urethane.

Lounge Chair by Sevada

It’s made using quarter sawn white oak, dominos and splines for joinery.
Finished with tried and true original finish.
The leather cushion wraps around and snaps underneath the seat so the chair can be used with or without the cushion.

It’s not the most comfortable chair, but it’s my first chair design/build and I’m pretty happy with it. For version 2 I’d like to give the back rest a little curvature.


Bartop by Kraig

Here is a photo of an Ash bar top I just completed for a local restaurant in Knightstown, IN. The top is 20’ long and 24” wide. It was book matched on the butt end of the slabs. I finished it with 3 coats of clear epoxy. This was my first large epoxy pour and it turned out great!

Queen Anne Vanity Desk by Aaron

This is a Walnut  Queen Anne Style vanity and stool I made for a client. This client wanted something that looked like an antique piece her grandmother had, and this is what I came up with. The piece features hand-carved cabriole legs (my first time), hand-cut dovetailed drawers, and Antiqued Queen Anne hardware. I used poplar for my secondary wood. The desk is finished with amber shellac and lacquer.


Chair Kits

Chair Kit Style 6 Assembly Instructions

Order Chair Kits here: https://www.mattcremona.com/product-category/chair-kits What You’ll Need Sander with 120, 180, and 220 grit Sandpaper Router 5/16″ or greater roundover bit (for the front of

Post Frame Barn Build

So Many Purlins

Welcome back to the build!  Last time we got all the trusses flown in, and this time, I’m going to go to purlin purgatory. I’m

Post Frame Barn Build

Setting the Trusses

Welcome back to the build!  Yesterday we got those two trusses up there, and today we’re to continue on with making a building. We have

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.