Load Testing the Bandsaw Mill

Using a few elm cants I can simulate making a wide cut without jeopardizing one of my big logs. This load test will test

  1. The motor and transmission.  Does the motor have the power to pull the blade through the cut and are the belts able to transfer the power from the motor to the drive shaft without slipping?
  2. The blade.  Will the blade be able to cut straight across the entire cut width and can it withstand the cut forces?
  3. The saw frame.  Is the sawhead stiff enough and strong enough to withstand the cutting forces?

1 - trailer load'

My friend, Donavan, had a massive elm tree removed from his yard and he had asked me to mill it into lumber for him.  The base of the tree is in his back yard and is inaccessible so it will need to be milled onsite.  The upper canopy was removed with a crane and stacked in his front yard.  Donavan cut these logs into cants so they could be moved.  I’ve had them loaded on my trailer for a few months now waiting for the mill to be ready.  These cants will make it really easy to try a progressively wider cut without risking a big log.  They can be set next to each other on the bed and cut all at once to simulate cutting one wide log.

2 - cants loaded

I stacked 5 cants on the mill which would give a cut width of 61″; not quite the maximum of the mill but still a ridiculously wide cut.  To establish a baseline for these cuts, I put a new blade on the mill.

3 - first cuts

The first few cuts were made at 4/4 to start getting the larger cants down to the same size so the blade would pass through them all.

4 - 3 logs

Cutting through the first 3 cants for a cut width of approximately 39″. Cut duration – 1:50

5 - 4 logs

Moving up to 4 cant for a cut width of 53″.  Cut duration – 3:01

6 - 5 logs

All 5 cants for a cut width of 61″.  Cut duration – 3:20

7 - cutting the rest

Donavan and I kept cutting the rest of his cants.  We cut more lumber than his truck could carry 🙂

8 - maple

The tests went way better than I imagined they would.  The blade tracked perfectly and the saw frame had no issues. The motor never really bogged down and the belts kept turning the pulleys.  The cut speed was also at least twice as fast as I was expecting and probably 6 times faster than doing the same cut with a chainsaw mill.  With that test behind me, I am confidant to start sawing my big logs.  They are the reason I built this mill in the first place.

Sponsors
Recent
Woodworking Projects

Walnut Dressing Vanity Build

To start things off, I’ll make the panel which will become the sides and top. While that’s sitting in the clamps, I’ll prep the material

6 Responses

  1. Hello Matt, congratulation for the performance of your machine! I would like to know, if you could share, the blade speeds that you use in this and other cuts, and if you have any experience like have to change the speed through the inverter frequency, in order to achieve better performance in the cut. Thanks for your content!

  2. Do you have any idea when you will have plans and material list and where you purchased materials for this great mill. I would love to build this mill nothing more fun than seeing the first cut on a log. I have a wood Mizer mill that only allows me to cut 20 inch diameter log. Look forward to hearing from you

Leave a Reply to Scott Trezona Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.