Matt’s Weekly Shop Update – July 25, 2018

This week I finished getting the mill reassembled to the point it was at last year before I disassembled it and was able to make a test cut. In the shop, I worked on the sideboard by finalizing the leg stock and cutting the grooves and mortises.

Bundle the Sideboard Project with 2 other pre-order projects and save 40%
https://thewoodwhispererguild.com/product-category/pre-order/

Plans for the Sawmill: https://www.mattcremona.com/shop/plans/wide-cut-bandsaw-mill-plans

Previous Shop Tour With Paul: https://youtu.be/Y8DNs08iZHc
http://www.canadianwoodworks.com/
http://instagram.com/canadianwoodworks
https://www.instagram.com/legacylumber/

Viewer Projects

Oregon Black Walnut River Table by Matt

I’m Matt Hallman from Hallman woodworks I have a small wood shop in Southern Oregon. This is our Oregon Black Walnut river table. These were locally milled black walnut slabs with Wenge Bowties and back filled with west systems epoxy. We fabricated the base as well made out of 3×3 tube then powder coated flat black. It was a super special build and were very excited about it you can find us as hallman woodworks on instagram. The bench Is also made from the same tree just with wood legs.

https://www.instagram.com/hallmanwoodworks/

Table and Chairs by Luke

My name is Luke and I designed and built this counter height table and chairs as my junior year carpentry project for shop class. It is made from walnut and maple. It used a lathe duplicator for the first time to complete all of the legs.  The project took all school year long in addition to countless hours of working on it at home too but it was all worth extremely fun.

Guitar by Mike

I just completed my first guitar project and there were a number of sources on youtube I used to learn techniques to get it done, and a number of your videos helped too. In particular, the mineral spirits grain preview trick caught a few glue spots I probably would have missed before dying it, so thanks for that! I think you’ll get a kick out of the wood used, a friend had a walnut log laying in his yard for 10 years before milling with a chainsaw. I have a planer and jointer so I cleaned it all up for him and scored the leftovers. The fretboard is Ipe which I got from my boat after replacing some trim. Link to some pictures are below.

http://www.twinharbor.com/projects/Guitar.aspx

Giant Adidas Shoe Box by JD

It’s made of 3/4” plywood and the graphics were done by a local shop here in Nashville.  It was color matched by one of my local Home Depot’s and they nailed it!  It was a fun project but time consuming.

Sponsors
Recent
Home Addition & Renovation

Building and Installing the Fridge Surround

Welcome back to our home renovation. This time, I’m going to make the fridge surround, set it in place, and then get the appliance garage

Home Addition & Renovation

Floor to Ceiling Appliance Garage Cabinet

Welcome back to the kitchen cabinetry building part of the renovation.  This time I’m going to be working on this giant cabinet here, which is

Drying

Drying and Shipping Slabs I Sold

Today I’m going to take you along with me as I put together a slab order, get it dried, and get it shipped out.  I

2 Responses

  1. Matt… looking for live wood slabs for an upcoming project. Do you still sell wood slabs? Thank you so much for your time. Really enjoy your Youtube videos!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.